Pebble and Quartz Pool Finishes in Brookside Village, Texas
League City Pool Resurfacing installs pebble and quartz pool finishes in Brookside Village, Texas, from textured pebble and glass bead blends to smoother quartz, in the residential town on Clear Creek just south of the Houston city limits and the Harris County line.
The Handbook of Texas places Brookside Village twenty-six miles north of Angleton in the far north-central corner of Brazoria County, with South Park Cemetery a mile to its east in 1982, and the City rents its community room to residents for events and meetings. Free estimates come by phone or the form and start with which finish suits the pool and the way it's used.
Call or request a free estimate any time, 24/7
No charge · answered 24/7
Get free estimates
Pebble and quartz finishes for owner-occupied homes
This is a town of houses lived in by their owners, though the survey sample behind the numbers is small. The Census Bureau's 2020–2024 survey covers about 542 housing units, give or take 56, so these shares are approximate: about 515 units (95.0%) are detached single-family houses, with none counted in buildings of two or more units, and owners live in about 432 of 478 occupied homes (90.4%).
About 213 units (39.3%) went up during the 1970s and 1980s, about 119 of them in the later decade, and about 223 (41.1%) predate 1980; the median year built is 1984, within four years either way. Owner-occupied homes carry a median value of $352,300, with a median household income of $110,833. There were 579 housing units and 1,548 people at the 2020 Census, and 1,600 people by the Bureau's July 1, 2025 estimate.
Call or request a free estimate any time, 24/7.
(281) 694-4352Choosing between pebble and quartz pool finishes
Quartz blends and how they're exposed
Wet Edge Technologies describes its Altima as a fortified blend of marble and quartz, preferred over traditional plaster for its longevity and strength. SGM, the maker of Diamond Brite, sets out an acid-wash way of exposing its quartz finish: the plaster sets for one to a few hours or overnight, a 25% muriatic acid solution goes on from the bowl up to the shallow end, with walls and steps last, and soda ash and water neutralize what's left. SGM calls that method easier to do but says it can give a less uniform finish, and it warns that a hose, a bucket or anything else left on the fresh plaster during exposure can leave a "shadow" on the surface.
Pebble with glass beads
Pebble Technology International's PebbleEssence takes its most popular textured finish, PebbleSheen, and adds smooth glass beads for extra water color, and Wet Edge Technologies' Prism Matrix blends its small and medium pebbles with glass beads for sparkle and color combinations that natural stone alone can't give. Pebble Technology International notes that glass finishes typically need different exposure methods from pebble ones.
What's normal in a new finish
SGM's warranty terms say some loss of aggregate is to be expected, especially in a new installation, and isn't a defect, and that because its finishes are applied and finished entirely by hand, color, shade, tone, texture and overall look will vary.
Call or request a free estimate any time, 24/7.
(281) 694-4352Permits and pool fences for finish work
Brookside Village says building permits "shall be obtained prior to making any improvements or alterations to a property", and each application must come with the applicant's credentials or master license, a driver's license and insurance. The City's forms page lists building, electrical, gas and plumbing, air-conditioning and on-site sewage permit applications. The code still adopts the Standard Building Code of 1999, by Ordinance No. 171-00 of November 14, 2000, and no pool code adoption turned up in it. Pool resurfacing isn't named, so ask the City's Planning and Development office whether a new finish needs a permit.
The zoning ordinance requires private swimming pools to be enclosed by a wall or fence at least four feet high "with automatic locking gates", and the enclosure stays shut while the pool is empty. The forms page also says every business operating within the city limits must apply for a business license and be approved by City Council.
Call or request a free estimate any time, 24/7.
(281) 694-4352Drainage and the drain-down before a new finish
The town sits on Clear Creek, and the City's planning and development officer is a Texas Certified Floodplain Manager; within its area, Brazoria Drainage District #4 installs driveway culverts when residents ask. Lake Charles clay, a soil the USDA puts in its very high shrink-swell class, is what its map shows at the town's Census center point.
No Brookside Village rule on draining pool water was found, and since the City issues on-site sewage permits, some lots may have septic systems, so ask the City where a drained pool's water may go before the pump goes in. A search of the City code for drought rules came up empty as well, which makes the refill date one more question for the City.
Call or request a free estimate any time, 24/7.
(281) 694-4352From scattered dwellings to a town of 1,600
The 1936 county highway map showed only scattered dwellings at the townsite, the Handbook of Texas records, but the community incorporated in 1959 and counted 560 people by 1961. It reached a new high of 1,671 in the early 1980s and had 1,960 residents in 2000, and the Atchison, Topeka and Santa Fe Railway once served it.
Call or request a free estimate any time, 24/7.
(281) 694-4352Pebble and quartz finishes with tile, coping and deck work
A finish change often brings new waterline tile and coping, a glass tile accent, a tile cleaning or a deck resurfacing, and white or colored plaster stays an option for owners who want a classic look. National figures for 2026 run $9,000 to $20,000+ for a pebble finish and $7,000 to $15,000 for quartz aggregate. Those are national ranges, and League City Pool Resurfacing sets the figure for your pool when it looks at it, free.
Elsewhere nearby, we also handle pool water features and waterfalls in Pearland and pool tile replacement in South Houston.
Call or request a free estimate any time, 24/7.
(281) 694-4352How a pebble or quartz resurfacing runs
Our usual order of work, checked against the City's rules; the estimate covers the details.
Samples and condition
We'll judge the current surface and set pebble, glass bead and quartz samples side by side.
Planning and Development
The City's planning office answers the permit question and where drained water may go.
Drain and prepare
The pool is drained, and loose finish comes off down to a sound, clean surface.
The new finish
The pebble or quartz finish goes on and is troweled.
Exposure
The finish is exposed by its maker's method, by water washing or acid, with nothing left lying on the fresh surface.
Fill and start-up
The pool fills, and the water is balanced through start-up.
Call or request a free estimate any time, 24/7.
(281) 694-4352Brookside Village pool finish questions
Does a swimming pool count toward lot coverage in Brookside Village?
Not in the single-family district. There the City's zoning counts the building, accessory buildings and other impervious surfaces toward the lot-coverage limit, "but not including swimming pools and tennis courts." The pool's enclosure rule still applies, and anything else the work adds to the lot is a question for the Planning and Development office.
Free pebble and quartz pool finish estimates in Brookside Village
Tell League City Pool Resurfacing which finish you are weighing and how the current surface looks. Calls and form requests are answered 24/7.